As an Amazon Associate I earn from qualifying purchases.
IP 54, 10 m Range, splashproof, 120° Motion Detector, max. 500 W or 4 LEDs, Steinel Infrared Motion Sensor IS 1 whiteSTEiNEL
- This motion detector is dust-proof and splashproof and perfect for targeted coverage of small areas. Of 10 m reach. The is 1 infrared motion detector comes with perfected sensor technology and an unobtrusive design at a surprisingly low price The motion sensor has a 120° angle of coverage with a max.
The detection zone that can be matched to specific needs or room situation thanks to the sensor lens that turns through 30° and tilts through 180°.
The movement sensor is suitable for indoors and outdoors. Time and twilight threshold can be adjusted to suit needs at an easily accessible control dial. Additionally the detection zone can be limited in any way required by fitting the shrouds provided.
|Height||5 cm (1.97 Inches)|
|Weight||0.14 kg (0.31 Pounds)|
|Width||8 cm (3.15 Inches)|
IP20, SEBSON PIR Sensor Ceiling Light 360°, LED suitable, Range max. 6m/360°, max. 2000/1000W, Infrared Motion Sensor, white, Ceiling MountedSEBSON
- 10 seconds to 15 minutes, the motion detector switches off again when no more movements are detected. The motion detector has a maximum power consumption of 2000W for incandescent lamps and 1000W for LED lamps or other energy-saving lamps.
The motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX.
Sebson pir motion detector for ceiling surface mounting, dimensions Ø115x23. 1mm. After a preset time of approx. The infrared sensor of this motion detector detects movements in a detection range of up to 6m with a detection angle of 360° on free area.
|Height||2.31 cm (0.91 Inches)|
|Length||11.5 cm (4.53 Inches)|
|Weight||0.11 kg (0.24 Pounds)|
|Width||11.5 cm (4.53 Inches)|
Flush Mounted, LED suitable, Infrared Motion Sensor, programmable, SEBSON 2x PIR Sensor Light Switch, Range max. 9m/160°, Wall MountedSEBSON
- 10 seconds to 7 minutes, the motion detector switches off again. The infrared sensor detects movements in a detection range of up to 9m at a detection angle of 160° and switches on the connected lighting.
Scope of delivery: 2 x SEBSON IR motion detector flush-mounted. The built-in motion detector can also be adjusted according to the ambient brightness in the range between 3 and 2, 000 LUX.
After a preset time of approx. Sebson motion detector for indoor and flush mounting, installation dimensions 50x50x33mm, 3-Wire. The motion detector has a maximum power consumption of 100W for LED lamps or other energy-saving lamps.
|Height||4.3 cm (1.69 Inches)|
|Length||8 cm (3.15 Inches)|
|Weight||0.2 kg (0.45 Pounds)|
|Width||8 cm (3.15 Inches)|
140° Infrared Movement Detector, Steinel Motion Sensor IS 140-2 White, Max. 1000 W or 6 LED Lights, 14m Range, SwivelingSTEiNEL
- The range of the motion detector reaches up to 14 m so the IS 140-2 surveys large areas. The optical system swivels through 180° and tilts through 90° for exact adjustment of the detection zone.
This motion sensor can be adjusted horizontally and vertically for a targeted detection along the building with a 140° angle of coverage.
The detection zone can also be customised using the shrouds provided; housing is uv resistant plastic; response value luminosity is 2 to 2000 lx. The is 140-2 infrared motion detector is wired up and mounted to the wall or corner quickly and easily - the corner wall mounts required are available as accessories.
|Height||9.5 cm (3.74 Inches)|
|Length||7 cm (2.76 Inches)|
|Weight||0.17 kg (0.37 Pounds)|
|Width||8.6 cm (3.39 Inches)|
5. Be In Your Mind
DC 12V Automatic PIR Infrared Motion Sensor Intelligent Switch Black 180 Degree Infrared Ray Human Body Inductor for LED LightBe In Your Mind
- Application lamps: incandescent lamp, energy-saving lamps, LED lamp, fluorescent lamp and other kinds of loads. Energy-saving: motion sensor turns lights ON automatically when motion is detected and turn off after a pre-selected time delay.
If it does not detect it, it will automatically turn off the light according to your turn-on time. Auto-sensing: turn on/off through automatic PIR motion detection, and it can also automatically identify day and night.
Adjustable sensor: users can adjust the working time, extend the time and sensing distance aaccording to local conditions. High performance: the sensor detector is an energy-saving device because it operates in a way that it only turns on the light when it detects motion.
Infrared Motion Sensor, LED suitable, SEBSON Mini PIR Sensor Indoor, Range max. 6m/360°, Ceiling Flush Mounted for Installation, ProgrammableSEBSON
- The detection range of this small motion detector is at 6m with a radius of 360° and a detection angle of 120°. The motion detector has a maximum power consumption of 800W for usual lamps and 200W for energy saving lamps.
Even after the ambient brightness 10 LUX or 2, 000 LUX, the white built-in motion detector can be adjusted. The duty cycle is programmable according to preset times 5 sec, 1 min, 30 sec, 3 min 5 min or 8 min. Sebson mini pir motion detector for indoor, dimensions switch: 56x37x26mm and Sensor Ø18x25mm.
|Height||2.6 cm (1.02 Inches)|
|Length||5.6 cm (2.2 Inches)|
|Weight||0.05 kg (0.1 Pounds)|
|Width||3.7 cm (1.46 Inches)|
360° Degree 1200W Ceiling Surface Mounted PIR Motion Security Occupancy Sensor Passive Infrared DetectorSECURITEC
- Max sensor range: 6m, diameter: 115mm, Height: 57mm. Adjutable time delay: 5 sec to 30 sec, 2 min & 6 min. 360 degree sensor, wall / Ceiling / Surface Mounted. Lux daylight settings:
400W/Energy-Saving Lamps MCE130, Maclean MCE130 Infrared Motion Sensor IR Built Range 6m, 800W/Incandescent LampsMaclean
- It gathers automatism, convenience, safety, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source.
It can identify day and night automatically. The product adopts good sensitivity detector and integrated circuit. It can start the load at once when one enters detection field.
|Height||8 cm (3.15 Inches)|
|Length||10 cm (3.94 Inches)|
|Weight||0.13 kg (0.29 Pounds)|
|Width||8 cm (3.15 Inches)|
Motion Sensor Light Switch,Automatic Infrared PIR Motion Sensor Switch for LED Light Recessed Wall LampWMLBK
- Scenariosuitable for garages, stairs, corridors. Applicationvarious loads such as incandescent lamps, fluorescent lamps, energy-saving lamps, LED lamps, etc. Automatic detectioncomfortably let the light automatically turn on/off.
Functionadjust the light to soft and stable without flicker. The switch can detect the infrared rays of the human body and use the infrared rays to control the load. Easy to install and useit does not need to spend too much time, it can be installed directly.
B22 Screw Light Bulb Holder LED PIR Infrared Motion Sensor Lamp Switch SocketBlackr
- It will auto light up when you enter into the detection range within 10M, and auto turn off after delay timeaccording as your rnrnadjustment if you had left the induction area.
It can identify day and night automatically. It utilize the infrared energy from human as control-signal source. 2 optional adjustment modes by twist the Lux button : only light up at night or both night and daylight. T is easy to install and used widely.
|Weight||0.09 kg (0.2 Pounds)|